Cloud Login
Hardware UPGRADED
The AutoPi Mini -
plug in and go
A compact OBD-II telematics device with built-in 4G/LTE, multi-constellation GNSS and deep OEM parameter support for supported electric and internal combustion engine vehicles. Choose the correct regional variant, check your required signals, and connect through the OBD-II port. Vehicle-specific settings may be needed.
Pre-installed nano SIM with subscription - check network coverage and the regional hardware variant
30+ OEM parameters out of the box - EV battery health, SoH, HV cell voltage, DTC, GPS and more
67.2 × 49.6 × 25 mm · 63 g · CE/E-Mark certified · designed and produced in the EU
In stock - ships tomorrow.
Global vehicle compatibility
Deep OEM parameter access, out of the box
AutoPi Mini supports OEM-specific data on listed electric, hybrid and internal combustion vehicles. Compatibility varies by vehicle, model year and firmware; configuration may be required. The 30+ parameter catalogue is not universal support on every vehicle. Verify required signals for your exact vehicle and firmware before ordering.
// vehicle compatibility
AutoPi Mini compatibility checker
Vehicle data is not yet available. Compatibility is unknown.
// your vehicle
Find your make, model and year
Required signals (optional)
// published data match
Your compatibility result
Select your vehicle's make, model and year to check compatibility.
Supported signals in published data
No signals are consistently reported as supported for this vehicle and model year. Contact us to confirm the data you need.
Supported means explicitly reported in the published records, not verified on your individual vehicle. Not reported means a false entry, not proven incompatibility. Unknown includes missing data, unlisted years and conflicting records.
// deployment region
Choose your regional hardware
Select EMEA, NA or APAC/LATAM in the shop. Confirm local carrier bands, SIM coverage and applicable approvals for the exact variant and deployment country; a vehicle data match does not establish regional suitability.
// device + connectivity
AutoPi Cloud included
EUR 129 hardware + EUR 6/month subscription, mandatory for 12 months. Includes 100 MB monthly. Excludes VAT, duties, shipping and accessories.
Order AutoPi MiniPlatform highlights
One device. Global connectivity. Instant data.
Compact enough to hide, powerful enough to run your entire fleet telematics stack. Designed and produced in the EU.
Technical Specifications
EUR 129 hardware + EUR 6/month subscription, mandatory for 12 months. First-year total: EUR 201. Includes 100 MB monthly. Excludes VAT, duties, shipping and accessories. Choose EMEA, NA or APAC/LATAM in the shop and verify regional suitability.
Order Now Download DatasheetSupports OBD-II protocols including legacy K-Line and KWP2000. OEM signals for EV battery health, charging, HV cell voltages and ICE diagnostics vary by vehicle, year and firmware. The 30+ catalogue is not universal; configuration and required-signal verification may be needed.
Nano SIM pre-installed. Three regional variants cover EMEA, North America, and APAC/LATAM. Connects to AutoPi Cloud automatically on first plug-in.
GPS, GLONASS, BeiDou, Galileo and SBAS in one integrated module. A-GPS for fast cold-start under 35 s. Velocity accuracy < 0.1 m/s.
Ultra Deep Sleep draws <3 mA at 12 V. Built-in backup battery (170 mAh). Protects vehicle battery in always-on and fleet deployments.
Approval requirements depend on the hardware variant, destination market and installation. Request the applicable compliance documents and confirm any additional testing or certification for your deployment. Device approvals do not guarantee worldwide system or vehicle approval.
Manage devices remotely via AutoPi Cloud. Push OTA firmware updates, configure loggers, and stream data to your own cloud via REST API or MQTT.
Factory-fit by OEMs or plug-in aftermarket. Small enough for hidden installs under dashboards. OBD-II extension cable sold separately for hard-to-reach ports.
Built-in accelerometer for ignition detection, trip start/stop, movement source and harsh driving event detection on EVs that lack OBD ignition signals.
Compatibility tables
Dots mark reported support. Empty or unfilled cells mean not reported, not proven incompatibility. A dash in the end-year column means support from the start year through the published dataset year, 2026. Future model years require confirmation.
Electric Vehicles & PHEV
Deep OEM battery parameters · EV-specific diagnostics
Search by make or model to see supported parameters:
Type |
Make |
Model |
Start Year |
Stop Year |
Mileage |
Battery Charge Level |
Range |
Battery SoH |
Battery Temperature |
HV Battery Minimum Cell Voltage |
HV Battery Maximum Cell Voltage |
EV HV Battery Current |
EV HV Battery Voltage |
HV Battery Maximum Energy |
HV Battery Available Energy |
HV Battery Minimum Temperature |
HV Battery Maximum Temperature |
HV Battery Available Power |
HV Battery Lifetime Energy |
VIN |
RPM |
Vehicle Speed |
Distance until service |
Fault Codes |
|---|
Internal Combustion Engine (ICE)
Standard OBD-II parameters · legacy protocol support (K-Line, KWP)
Search by make or model:
| Type | Make | Model | Start Year | Stop Year | Mileage | Fuel Level | VIN | RPM | Vehicle Speed | Distance until service | Fault Codes |
|---|
Most ICE vehicles also support these standard OBD-II parameters:
Engine load value · Coolant temperature · Short/long-term fuel trim · Fuel pressure · Intake MAP · Timing advance · Intake air temperature · MAF · Throttle position · Run time since engine start · Fuel rail pressure (relative & direct) · EGR & EGR error · Distance traveled (codes cleared) · Barometric pressure · Control module voltage · Absolute load value · OBD ambient air temperature · Time since codes cleared · Absolute fuel rail pressure · Hybrid battery pack remaining life · Engine oil temperature · Fuel injector timing · Fuel rate · DTC value · Distance & time since MIL ON
Installation
Plug in. Connect. Verify.
The AutoPi Mini connects directly to your vehicle's OBD-II port. No wiring, no tools - just plug in and the device automatically registers with AutoPi Cloud. Position logo-side up toward the sky to ensure the integrated GPS antenna has a clear signal.
EMEA
Europe · Middle East · Africa
NA
North America
APAC/LATAM
Asia · Pacific · Latin America
Use cases
Built for real-world deployments
From a single company car to thousands of vehicles across multiple markets - the AutoPi Mini adapts to your operation without added complexity.
Track mileage, GPS position, fuel level, speed and fault codes across an entire fleet. Set up automated alerts for DTC events and service intervals without touching any vehicle.
Monitor real-time battery charge, state of health, HV cell voltages and temperature ranges for electric vehicle fleets. Identify degradation early and optimise charging schedules based on live data.
Read engine diagnostics, coolant temperature, oil temperature, fuel trim and DTC codes continuously. Surface fault codes the moment they appear and correlate them with vehicle usage data to predict failures before they happen.
Embed the AutoPi Mini as a factory-installed telematics unit. Its small 67 × 50 mm footprint fits easily behind dashboards. CE/E-Mark certifications cover global type approval - no additional certification work required per market.
Deploy the same device across EMEA, North America, and APAC/LATAM with region-specific modem variants. The pre-installed SIM and AutoPi Cloud manage connectivity automatically - no per-country SIM logistics required.
Log speed, RPM, acceleration and GPS position with trip-level granularity. Combine with the built-in 3-axis accelerometer for harsh braking and cornering detection. Feed telematics data to insurance or leasing scoring systems via REST API.
Frequently asked questions
The AutoPi Mini is a small telematics device, not bigger than a deck of cards. It's CAN bus ready and essentially plug-and-play. It connects to your car, giving you insights into your vehicle’s performance and health.
Mini provides GPS tracking and supported OBD-II and OEM telemetry through AutoPi Cloud. Signal availability depends on the vehicle and configuration. Check your required signals, then confirm the configuration during your proof of concept. Mini does not provide the custom Linux, Docker or raw CAN-FD capabilities of CM4 and Pro.
You plug the AutoPi Mini into your car’s OBD-II port. It sends data through the internet, which you can access via the AutoPi Cloud from your mobile, tablet, or computer.
The AutoPi Mini is perfect for fleet managers or companies that run multiple vehicles. It’s easy to install, manage, and improve operations with features like fuel management and GPS tracking.
Mini gives projects a compact starting point for supported vehicle telemetry without developing custom device software. Purchase your evaluation devices and agree a proof-of-concept scope with our engineers to validate the required data and integration.
An OBD-II port alone does not confirm support for every signal. Use the make, model and year checker to review available coverage. If your vehicle or required signal is not listed, request confirmation before ordering for that requirement.
It’s very easy to install. Just plug it into the OBD-II port in your car. No tools or professional help needed. There are step-by-step guides available to help you through the process.
The AutoPi Mini requires minimal maintenance. Just ensure it stays plugged in and occasionally check for software updates through the AutoPi Cloud.
We offer customer support through our website, including troubleshooting guides, FAQs, and a support team ready to help you with any issues.
Hardware costs EUR 129 plus EUR 6/month for AutoPi SIM and Cloud, with a mandatory 12-month subscription including 100 MB/month. The first-year minimum is EUR 201 before VAT, duties, shipping and accessories. Choose your regional variant and check current terms.
Choose the appropriate regional variant in the Mini shop page or discuss your evaluation requirements with sales.
The AutoPi Mini is designed to be reliable and user-friendly. However, if you encounter any issues, our support team is available to help resolve them quickly.
If you have more questions, feel free to reach out to our customer support team or visit our website for more detailed information.
Still have questions?
Get in touch with us - we're ready to answer any and all questions.